TECHNORA ESCAPE NECKLACE This is a covert necklace designed for use as a friction saw to cut through non-metallic restraints when restrained to the front. There is no preparation required (knots to tie etc.) ... - Feed one end of the cord through the restraint until it reaches one of the knots. - Place the foot loops over the toe part of your shoes or if barefoot between the big toe and increase the tension of the cord so it positions itself on the lower part of the restraint to avoid friction injuries. - Now move your feet in a slow pedal motion and gradually build up speed. - The heat from the friction will burn through the restraint. Tip: For silently removing cable-ties and nylon rope you do not need to use the cutting knots. Keep within the two knots to keep the noise to a minimum. Tip: For silently removing cable-ties and nylon rope you do not need to use the cutting knots. Keep within the two knots to keep the noise to a minimum. Add a cutting knot to the middle of the necklace for natural rope and cord (hemp etc.) The Technora Escape Necklace also features the Micro Striker Bead (MSB) for breaking tempered glass windows It is concealed inside the plastic breakaway connector the MSB is hidden until you require it. To deploy: Pull on the cord either side of the breakaway connector to pull apart. The MSB is seated inside the the female part. Simply slide the plastic female part down the cord and past the first cutting knot whilst holding onto the end of the cord between your thumb and forefinger. The MSB will eject from the connector. Slide the MSB to the diamond stopper knot. Now wrap the cord containing the tools around your hand and leave about 12 inches of cord hanging free with the MSB on the end. Swing the MSB towards the glass - very little force is required as the mineral hardness of the MSB (9.5 MOHS) is greater than glass (will punch a hole in a glass bottle!). You can use this to escape from a car or rescue persons from a car (the friction saw will cut seat-belts). To close the connectors simply push and twist them together by hand. Do not use a tool (pliers etc.) as this may cause damage to the connectors. 4 x Silicone Retainers fitted as standard to carry the tools (Light Sticks, Bogota Picks, Shims, Modified Hair Grip, Handcuff keys etc.) Our Technora Escape Necklaces and Advanced Personal Escape Kits have a diamond stopper knot as shown above. If it does not feature the diamond stopper knot it is not our product - it is a copy! Watch it in action! MSB deployed from APEK Necklace - YouTube Video